Thiol–ene coupling reaction of fatty acid monomers

The reactivities and reaction rates of the thiol–ene coupling reaction of 2‐ethyl‐(hydroxymethyl)‐1,3‐propanediol trimercapto acetate and 2‐ethyl‐(hydroxymethyl)‐1,3‐propanediol trimercapto propionate with two common unsaturated fatty acid methyl esters (methyl oleate and methyl linoleate) were evaluated. The reactions were monitored with real‐time IR and ¹H NMR, which both showed that the mercapto acetate was more reactive than the mercapto propionate. Both thiols were more prone to add to the monounsaturated methyl oleate than to methyl linoleate, which contained two unconjugated double bonds. According to bond energy calculations, the thiol hydrogen of mercapto acetate was somewhat more difficult to abstract than the hydrogen of mercapto propionate. Consequently, the formed S? C bond in the acetate case was stronger than in the propionate case, and so the equilibrium was more shifted toward the addition products. The real‐time IR measurements also showed that the cis unsaturation in methyl oleate isomerized much more quickly than that in methyl linoleate, and this also had an impact on the overall addition rate of the thiols because a trans unsaturation was more reactive than a cis unsaturation. The higher isomerization rates in the oleate systems, compared with those of the linoleate systems, was suggested to be due to a more restricted rotation along the C? C bond of the reacted unsaturation in linoleate. This study showed the importance of trans unsaturations in obtaining reasonable reaction rates in thiol–ene reactions with fatty acid derivatives. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 6346–6352, 2004     

Influence of the UV radiation wavelength on the curing of oligourethaneacrylate compositions for protective coatings of optical fibers

The curing kinetics of films produced from compositions based on UV-curable oligourethaneacrylates is investigated using, as a source of radiation, an individual spectral line separated by a monochromator from the radiation of a DRT-400 mercury tubular lamp. It has been established that in the region of spectral sensitivity of the composition, the curing time of the film is inversely proportional to the intensity of volumetric absorption of the radiation-source photons by the initiator at the lower surface of the film under study. Individual contributions of some of the lines to the process of composition curing by using the integral spectrum of the radiation source have been evaluated. The spectral-kinetic results obtained were confirmed when using the compositions under study as protective coatings of optical quartz fibers.Translated from Zhurnal Prikladnoi Spektroskopii, Vol. 71, No. 6, pp. 836–840, November–December, 2004.This revised version was published online in April 2005 with a corrected cover date.     

利用非规整膜系实现宽角度入射减偏振、减反射薄膜的研究

利用非均匀膜系理论对宽角度入射减偏振、减反射薄膜进行优化设计,分析了在宽角度入射的情况下,偏振光产生透过率不同的原因,选取了Na3AlF6、Ta2O5和Al2O3三种不同折射率材料,采用BK7作为基底,模拟设计了光谱区在500～560 nm波段、入射角为0~70°之间的多层减偏振、减反射薄膜,设计结果表明,薄膜的透过率得到大幅度提高.     

折射率色散效应对晶体硅太阳电池反射率的影响

为了分析色散效应对晶体硅太阳电池反射率的影响，在考虑材料折射率色散效应的情况下，运用光学干涉矩阵计算了具有SiO2单层减反射膜和MgF2/ZnS双层减反射膜晶体硅太阳电池的反射率与波长的函数关系，并与实验结果和未考虑色散效应的计算结果进行了对比分析.结果表明：考虑折射率色散效应的计算结果与实验测量数据完全相符，而未考虑折射率色散效应的计算结果与实验测量数据相差较大，最大差值分别为21.5％和16.9％.     

Study of the gradual interface between hydroxyapatite thin films PLD grown onto Ti-controlled sublayers

Hydroxyapatite thin films were grown on layered structures by Pulsed Laser Deposition with the goal of investigating the interface of the ceramic film with the substrate. The latter consisted of Si/TiN/Ti sandwich structures. This multilayer substrate was also prepared by laser ablation earlier in the same experimental session.This particular type of structure was chosen in order to induce the in situ growth of hydroxyapatite directly onto freshly deposited Ti. We tried this way to avoid previous direct Ti exposure to air, hence its oxidation. The subsequent depositions of multilayers were performed with the aid of a carousel multi-target system mounted inside the irradiation chamber. This allowed for selecting in order the respective TiN, Ti and HA targets without opening the chamber between individual depositions.X-ray diffractometry, transmission electron microscopy and selected area electron diffractometry studies revealed the formation at the interface of a transition complex phase, 2 to 25 nm thick, consisting of a mixture of TiO₂ and CaP phase. The specific growth of TiN and Ti phases was also investigated.     

Effects of duty ratio at low frequency on growth mechanism of micro-plasma oxidation ceramic coatings on Ti alloy

The aim of this work is to study the effects of duty ratio on the growth mechanism of the ceramic coatings on Ti-6Al-4V alloy prepared by pulsed single-polar MPO at 50 Hz in NaAlO₂ solution. The phase composition of the coatings was studied by X-ray diffraction, and the morphology and the element distribution in the coating were examined through scanning electron microscopy and energy dispersive spectroscopy. The thickness of the coatings was measured by eddy current coating thickness gauge. The corrosion resistance of the coated samples was examined by linear sweep voltammetry technique in 3.5% NaCl solution. The changes of the duty ratio (D) of the anode process led to the changes of the mode of the spark discharge during the pulsed single-polar MPO process, which further influenced the structure and the morphology of the ceramic coatings. The coatings prepared at D = 10% were composed of a large amount of Al₂TiO₅ and a little γ-Al₂O₃ while the coatings prepared at D = 45% were mainly composed of α-Al₂O₃ and γ-Al₂O₃. The coating thickness and the roughness were both increased with the increasing D due to the formation of Al₂O₃. The formation of Al₂TiO₅ resulted from the spark discharge due to the breakdown of the oxide film, while the formation of Al₂O₃ resulted from the spark discharge due to the breakdown of the vapor envelope. The ceramic coatings improved the corrosion resistance of Ti-6Al-4V alloy. And the surface morphology and the coating thickness determined the corrosion resistance of the coated samples prepared at D = 45% was better than that of the coated samples prepared at D = 10%.     

Surface characterization of plasma deposited nano-structured fluorocarbon coatings for promoting in vitro cell growth

Nano-structured “teflon-like” coatings characterized by highly-fluorinated, random, ribbon-shaped, micrometers-long structures were deposited on polyethylenetherephtalate (PET) substrates by plasma enhanced-chemical vapour deposition (PE-CVD) using modulated radiofrequency (RF, 13.56 MHz) glow discharges fed with C₂F₄ in modulated discharge (MD) and continuous wave (CW) regimes. Surfaces obtained in this way featured identical chemical composition and different roughness in the nanometric scale. Water contact angle (WCA) measurements, scanning electron microscopy (SEM) and atomic force microscopy (AFM) were utilized to characterize the surfaces. A positive relationship was shown to exist between the WCA value and the mean nano-structure height and the area root-mean-square (RMS) roughness of coatings. The possibility of obtaining coatings of varying nano-structure height, i.e., roughness, in a nanometric scale represents a promising result for further use of these surfaces as substrates for experiments on cell adhesion, proliferation and growth.     

Preparation of co‐polymethyl(alkoxy)siloxanes by acid‐catalyzed controlled hydrolytic copolycondensation of methyl(trialkoxy)silane and tetraalkoxysilane

Polymethyl(alkoxy)siloxane copolymers, poly(MTES‐co‐TEOS), and poly(MTMS‐co‐TMOS), are prepared by acid‐catalyzed controlled hydrolytic co‐polycondensation of methyl(trialkoxy)silane MeSi(OR)₃ (R = Et (MTES) and Me (MTMS)) and tetra‐alkoxysilane Si(OR)₄ (R = Et (TEOS) and Me (TMOS)), respectively. The products are purified by fractional precipitation to provide polymethyl(alkoxy)siloxane copolymers with molecular weight 1000–10,000 (poly(MTES‐co‐TEOS)) or 1700–100,000 (poly(MTMS‐co‐TMOS)) that are stable to self‐condensation. These polymers are soluble in common organic solvents except for hexane, and form flexible and transparent free‐standing films with a tensile strength of 4.0–10.0 MPa. The structure of the polymethyl(alkoxy)siloxane copolymers is thought to be a random or a block co‐polymer. They are found to provide coating films with an adhesive strength up to 10, a refractive index of 1.36–1.40, and a dielectric constant of 3.5–3.6. The products also show better weathering stability than polyethoxysiloxane due to the hydrolytic polycondensation of TEOS. Field emission‐scanning electron micrography analysis reveals that coating films are composed of a micro‐phase separated structure. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013 , 51, 4732–4741     

Access to nonisocyanate poly(thio)urethanes: A comparative study

This article describes the synthesis of new cyclic compounds able to react with amines to get nonisocyanate polyurethanes (NIPUs). The contribution of the most studied five‐membered cyclic carbonate was compared to five‐membered cyclic dithiocarbonate analogous and to a six‐membered cyclic carbonate. Difunctional reactive species were obtained by a simple substitution reaction or an efficient thiol–ene coupling reaction. The products, obtained with high yields, were characterized by 1H NMR, 13C NMR, and Fourier tansform infrared spectroscopy analysis. The dicyclocarbonates were then used to synthesize NIPUs by step growth polymerization with several diamines. These materials exhibited glass transition temperatures from 19 to ?29 °C, molar mass from 1800 to 20,400 g mol^?1, and a 20% mass loss temperature (T_d = 20%) between 249 and 296 °C. Such materials are interesting candidates for coating applications. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013, 51, 3284–3296     

Thermoset Alkyd-Acrylic Hybrid Emulsions for Coatings

Alkyd acrylic hybrid emulsions can offer cost/performance advantages over common 1K coatings such as polyurethane dispersions (PUDs), acrylic emulsions and blends. Hybrid emulsions with different ratios of alkyd resin to acrylic monomers were synthesized. Emulsion with resin-to monomer ratio of 1:1 (wt/wt) with total solids as high as 50% had a shelf stability of more than 8 months. Morphology of hybrid emulsions was studied by scanning electron microscopy. Hybrid emulsions were characterized by Fourier transform infrared spectroscopy and thermogravimetric analysis. Films obtained from the hybrid emulsions were found to be homogeneous and exhibited excellent thermal and coating properties.